주요 콘텐츠로 건너뛰기

Samsung Galaxy S20 Ultra 배터리 교체

2 단계
Samsung Galaxy S20 Ultra Battery Replacement, Lift the battery from its adhesive: 0 단계, 이미지 2개 중 1개 Samsung Galaxy S20 Ultra Battery Replacement, Lift the battery from its adhesive: 0 단계, 이미지 2개 중 2개
Lift the battery from its adhesive
  • Apply a suction handle to the center of the battery.

  • Brace the top and bottom of the device against your work surface with one hand and firmly pull up on the suction handle with the other.

  • The adhesive takes time and repeated pulls rather than strong force to loosen. Pull on the suction cup with steady force for 15 seconds at a time.

  • If the battery doesn't loosen after multiple attempts, apply 1-2 drops of isopropyl alcohol along the top, left, and right edges, wait a minute, and pull again.

  • Continue lifting until the battery separates from the phone.

배터리 중앙에 흡입 핸들을 부착하세요.

한 손으로 기기의 상단과 하단을 작업대 표면에 잡고 다른 손으로 흡입 핸들을 단단히 들어 올리세요.

처음에는 배터리가 움직이지 않습니다. 이 과정을 5-6회 반복하여 (알코올 몇 방울을 추가하고, 2-3분 기다린 후 흡입 핸들을 당기세요) 접착제를 서서히 분리하세요.

배터리가 휴대폰에서 분리될 때까지 계속 들어올리세요.

[title] Lift the battery from its adhesive
[* black] Apply a suction handle to the center of the battery.
[* black] Brace the top and bottom of the device against your work surface with one hand and firmly pull up on the suction handle with the other.
- [* icon_note] The battery will not budge the first time you do this. Repeat the process (add a few drops of alcohol, wait 2-3 minutes, and pull with the suction handle) five or six times to gradually release the adhesive.
+ [* black] The adhesive takes time and repeated pulls rather than strong force to loosen. Pull on the suction cup with steady force for 15 seconds at a time.
+ [* black] If the battery doesn't loosen after multiple attempts, apply 1-2 drops of isopropyl alcohol along the top, left, and right edges, wait a minute, and pull again.
[* black] Continue lifting until the battery separates from the phone.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.