주요 콘텐츠로 건너뛰기

Samsung Galaxy S20 Ultra Vervanging van de batterij

영어
네덜란드어

안내서 정보

= 완료 = 미완료
    This guide shows how to remove and replace the battery for the Samsung Galaxy S20 Ultra.
    The battery is held in place with strong adhesive. High concentration (over 90%) isopropyl alcohol is necessary to loosen and release this adhesive.
    '''***If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]] and do not heat your phone.'''***
    '''***For your safety, discharge your battery below 25% before disassembling your phone.'''*** This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
    You'll need replacement adhesive in order to complete this repair.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      After completing Follow ++[guide|152044|this guide|new_window=true]++ to perform a battery cycle reset, and ++[[Battery Calibration|calibrate your newly-installed battery|new_window=true]]++.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20S20%20Ultra|Answers community] for troubleshooting help.

      안내서 단계

      1 단계 — Dien wat isopropyl alcohol toe

      Dien hooggeconcentreerde (>90%) isopropyl alcohol toe in de gaten tussen het frame en de zijkanten van de batterij.

      2 단계 — Scheid de batterij van de lijm eronder

      Druk een zuignap op het midden van de batterij.

      3 단계 — Verwijder de batterij uit het toestel

      Verwijder de batterij.

      귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.