/
내 작업대

기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
가입
로그인

Retrait de la coque arrière

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 14개에 영향을 미칩니다.

안내서로 돌아가기
영어
프랑스어
7 단계
Back Cover Removal: 0 단계, 이미지 3개 중 1개 Back Cover Removal: 0 단계, 이미지 3개 중 2개 Back Cover Removal: 0 단계, 이미지 3개 중 3개

  • Be careful near the corners, as the glass is weakest there.

  • Insert an opening pick into the lower-left corner of the rear panel.

  • Using another opening pick, cut the adhesive along the left edge of the rear panel.

  • Don't insert an opening pick in more than halfway on the left edge near the fingerprint sensor or you may damage the ribbon cable inside.

  • It is fine if opening picks fall out as the back cover becomes separated.

Insérez un médiator dans le coin inférieur gauche de la coque arrière.

Prenez un autre médiator pour trancher l'adhésif le long du bord gauche de la coque arrière.

N'enfoncez pas plus de la moitié du médiator au niveau du lecteur d'empreintes digitales, vous risquez d'endommager la nappe à l'intérieur.

Ce n'est pas grave si les médiators tombent au fur et à mesure que la coque se soulève.

+[* icon_caution] Be careful near the corners, as the glass is weakest there.
[* black] Insert an opening pick into the lower-left corner of the rear panel.
[* black] Using another opening pick, cut the adhesive along the left edge of the rear panel.
-[* icon_caution] Do not insert an opening pick in more than half way on the left edge near the fingerprint sensor or you may damage the ribbon cable inside.
+[* icon_caution] Don't insert an opening pick in more than halfway on the left edge near the fingerprint sensor or you may damage the ribbon cable inside.
[* icon_note] It is fine if opening picks fall out as the back cover becomes separated.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.