주요 콘텐츠로 건너뛰기

任天堂 Switch 屏幕更换

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

16 단계 번역중

16 단계
Nintendo Switch Screen Replacement: 0 단계, 이미지 3개 중 1개 Nintendo Switch Screen Replacement: 0 단계, 이미지 3개 중 2개 Nintendo Switch Screen Replacement: 0 단계, 이미지 3개 중 3개
  • Lift the right edge of the screen straight off the device, threading the ribbon cables through the frame as you do so.

  • Take care not to snag any of the ribbon cables on the frame as you remove the screen.

  • You can reuse the screen adhesive if it is still sticky. Otherwise, replace the adhesive with double-sided tape such as Tesa tape.

将屏幕的右边缘垂直提起设备,使带状电缆穿过框架。

并注意不要将任何带状电缆卡在框架上。

如果屏幕胶条仍然保持较高粘性,您可以重复使用它。否则,请用Tesa胶带等双面胶带更换旧的胶条。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.