주요 콘텐츠로 건너뛰기

iPhone 12 Rear-Facing Camera/후면 카메라 교체

영어
한국어

안내서 선행 작업

모든 선행 작업 안내서의 번역이 끝나야 이 번역이 완료된 것으로 간주됩니다.

iPhone 12 Pentalobe 나사 교체

여는 픽을 3mm에 표시하기

iPhone 12 디스플레이 어셈블리 교체

안내서 정보

= 완료 = 미완료
    Use this guide to remove and replace the rear cameras in the iPhone 12. All of the camera modules are replaced as a single unit.

    ***Note***: On iOS 18 and newer, you can calibrate new, genuine camera modules using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''To reassemble your device, follow the above steps in reverse order.'''
      ***To reassemble your device, follow the above steps in reverse order.***
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→*** About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012|iPhone 12 Answers community] for help.

      안내서 단계

      1 단계 — 카메라 커버 풀기

      후면 카메라 센서를 고정하는 나사 다섯 개를 분리하세요.

      2 단계 — 카메라 커버 분리하기

      로직 보드에서 가장 가까운 가장자리의 카메라 커버를 들어 올려 분리하세요.

      3 단계 — 카메라 어셈블리 분리하기

      Spudger/스퍼저나 손톱을 사용하여 첫 번째 카메라 케이블 커넥터를 소켓에서 똑바로 들어 올려 분리하세요.

      4 단계

      Spudger/스퍼저나 손톱을 사용하여 두 번째 카메라 케이블 커넥터를 소켓에서 똑바로 들어 올려 분리하세요.

      5 단계 — 후면 카메라 분리하기

      Spudger/스퍼저 끝을 사용하여 카메라 어셈블리를 iPhone에서 들어올리세요.

      귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.