주요 콘텐츠로 건너뛰기

여는 절차 및 배터리 분리하기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 17개에 영향을 미칩니다.

12 단계
Opening Procedure and Battery Disconnect: 0 단계, 이미지 3개 중 1개 Opening Procedure and Battery Disconnect: 0 단계, 이미지 3개 중 2개 Opening Procedure and Battery Disconnect: 0 단계, 이미지 3개 중 3개
  • Round the left corner with the opening pick and slide it along the top edge of the Surface. Stop when the pick is 2.75 inches (70 mm) away from the left edge.

  • The next 6 inches (15 cm) of the top edge of the case is covered by the left and right antennas, which sit between the case and the screen bezel. Follow the next steps carefully to avoid damaging the antennas.

여는 픽으로 왼편 모서리를 따라서 돌아 밀고 Surface 상단 가장자리를 따라 미세요. 픽을 왼편 가장자리에서 2.75인치를 (70mm) 남기고 멈추세요.

케이스 상단 가장자리의 다음 6인치는 (15cm) 케이스와 스크린 베젤 사이에 위치한 왼편 및 오른편 안테나로 덮여 있습니다. 안테나를 손상하지 않도록 다음 단계를 조심히 따르세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.