주요 콘텐츠로 건너뛰기

Nintendo GameCube Optical Drive Assembly Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

6 단계
Nintendo GameCube Optical Drive Assembly Replacement: 0 단계, 이미지 3개 중 1개 Nintendo GameCube Optical Drive Assembly Replacement: 0 단계, 이미지 3개 중 2개 Nintendo GameCube Optical Drive Assembly Replacement: 0 단계, 이미지 3개 중 3개
  • Use a flathead screwdriver to release the two clips located on the back half of the drive assembly.

  • The final clip doesn't need to be released; the top half of the drive assembly will slide away from the lower half.

  • Finish removing the top half of the drive assembly from the base.

  • Be careful not to detach the red wire or the white ribbon cable still attached.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.