Continuïteitstest van een Scart Male / 3 RCA-kabel

1 단계 — Pak je gereedschap

Gebruik een multimeter en een Scart Male / 3RCA-kabel

2 단계 — Connections

Connect the black wire to the COM terminal of the multimeter and the red wire to the V Ω terminal corresponding to the Voltage (V), the resistance (Ω).

3 단계 — setting

Set the multimeter to the sound symbol signifying the continuity test and you should see a sound symbol appear on the screen

4 단계

Using the table, locate which signal corresponds to each pin then place the red terminal on the chosen pin on the socket then place the black terminal on the pins of each RCA plug simultaneously

5 단계 — Results

1. Multimeter rings = pin chosen by the two terminals matched