주요 콘텐츠로 건너뛰기

Samsung Galaxy S21+ Back Cover Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 12개에 영향을 미칩니다.

영어
프랑스어
2 단계
Samsung Galaxy S21+ Back Cover Replacement, Insert an opening pick: 0 단계, 이미지 3개 중 1개 Samsung Galaxy S21+ Back Cover Replacement, Insert an opening pick: 0 단계, 이미지 3개 중 2개 Samsung Galaxy S21+ Back Cover Replacement, Insert an opening pick: 0 단계, 이미지 3개 중 3개
Insert an opening pick
  • Secure a suction handle to the bottom edge of the back cover, as close to the edge as possible.

  • If the back cover is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.

  • Lift the back cover with the suction handle to create a small gap between the back cover and the frame.

  • If you have trouble creating a gap, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

  • Insert an opening pick into the gap you created.

  • Slide the opening pick to the bottom left corner to slice the adhesive.

  • Leave the opening pick in place to prevent the adhesive from resealing.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.