주요 콘텐츠로 건너뛰기

Changement patins Logitech G Pro X Superlight

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
프랑스어
2 단계
Logitech G Pro X Superlight Feet Replacement, Remove the feet: 0 단계, 이미지 1개 중 1개
Remove the feet
  • The feet are secured to the bottom of the mouse with strong adhesive. In order to cleanly remove them, the adhesive needs to be thoroughly heated.

  • Heat an iOpener and lay it on the mouse feet for one minute to heat the adhesive.

  • Alternatively, you can use a hair dryer on the Low heat setting to soften the adhesive.

  • If you're using a hair dryer, only heat the feet a few seconds at a time or you may warp the plastic shell.

Les patins sont fixés à la base de la souris à l'aide d'un adhésif fort. Pour les retirer proprement, il est nécessaire de bien chauffer l'adhésif.

Chauffez un iOpener et posez-le sur les patins de la souris pendant une minute pour chauffer l'adhésif.

Vous pouvez également utiliser un sèche-cheveux à basse température pour ramollir l'adhésif.

Si vous utilisez un sèche-cheveux, ne chauffez les pieds que quelques secondes à la fois, sinon vous risquez de déformer la coque en plastique.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.