주요 콘텐츠로 건너뛰기

Changement patins Logitech G Pro X Superlight

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
프랑스어
3 단계
Logitech G Pro X Superlight Feet Replacement: 0 단계, 이미지 3개 중 1개 Logitech G Pro X Superlight Feet Replacement: 0 단계, 이미지 3개 중 2개 Logitech G Pro X Superlight Feet Replacement: 0 단계, 이미지 3개 중 3개
  • The feet have two layers—a rubberized one and an adhesive pad underneath.

  • If you're reusing the feet, be very careful not to separate the two layers or damage the feet.

  • Carefully slide the point of a spudger under the circular foot, making sure it goes under both the foot and its adhesive pad.

  • The foot recesses have a small notch that makes it easier to slide your spudger under.

  • Gently slide the spudger farther under the foot and lift until you can grab it with your fingers.

Les patins sont composés de deux couches : une couche caoutchoutée et un support adhésif en dessous.

Si vous réutilisez les patins, veillez à ne pas séparer les deux couches et à ne pas endommager les patins.

Glissez soigneusement la pointe d'une spatule sous le patin circulaire, en veillant à ce qu'elle passe à la fois sous le patin et sous son support adhésif.

Les renfoncements des patins comportent une petite encoche qui permet d'insérer plus facilement votre spatule (spudger).

Glissez doucement la spatule plus loin sous le patin et soulevez-le jusqu'à ce que vous puissiez le saisir avec les doigts.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.