주요 콘텐츠로 건너뛰기

IBM ThinkPad T42 Kunststoff-Kanteneinfassung entfernen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

1 단계 번역중

1 단계
Disassembling IBM ThinkPad T42 Plastic Edge Cover: 0 단계, 이미지 2개 중 1개 Disassembling IBM ThinkPad T42 Plastic Edge Cover: 0 단계, 이미지 2개 중 2개
  • Starting from the bottom right, carefully remove the bezel by pulling it up gently. If needed use a spudger or flathead screwdriver to help.

Entferne vorsichtig von unten rechts beginnend die Einfassung. Benutze, wenn nötig, einen Spudger oder einen Schlitzschraubendreher.

-[* red] Starting from the bottom right, carefully remove off the bezel. Use a spudger or flat head screwdriver if needed.
+[* red] Starting from the bottom right, carefully remove the bezel by pulling it up gently. If needed use a spudger or flathead screwdriver to help.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.