주요 콘텐츠로 건너뛰기

iPhone 6の電源ボタンケーブルアセンブリの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

18 단계 번역중

18 단계
iPhone 6 Power Button Cable Assembly Replacement: 0 단계, 이미지 3개 중 1개 iPhone 6 Power Button Cable Assembly Replacement: 0 단계, 이미지 3개 중 2개 iPhone 6 Power Button Cable Assembly Replacement: 0 단계, 이미지 3개 중 3개
  • Begin to peel the flash/microphone/power button assembly cable up from the rear case starting from the connector end.

  • Continue to peel the cable up, being particularly careful of the narrow component ends of the cable.

  • Remove the flash/microphone/power button assembly cable from the phone.

コネクターの端周辺の背面ケースからフラッシュ、マイク、パワーボタンアセンブリケーブルを剥がしていきます。

続けて、ケーブルを剥がしていきます。特にケーブルの終わりあたりは細くなっている部分があるので、注意してください。

本体からフラッシュ、マイク、パワーボタンアセンブリケーブルを外します。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.