/
내 작업대

기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
가입
로그인

Remplacement de la vitre arrière du Samsung Galaxy S6

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 25개에 영향을 미칩니다.

안내서로 돌아가기
영어
프랑스어
이전 단계

6 단계 번역중

6 단계
Samsung Galaxy S6 Rear Glass Replacement: 0 단계, 이미지 2개 중 1개 Samsung Galaxy S6 Rear Glass Replacement: 0 단계, 이미지 2개 중 2개

  • To install new rear glass:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis.

  • Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.

  • Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

  • If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow this guide.

Pour installer une nouvelle vitre arrière :

Utilisez une pincette pour décoller les restes d'adhésif du châssis interne du téléphone.

Nettoyez les zones d'adhérence avec de l'alcool isopropylique (concentré à au moins 90 %) et un chiffon non-pelucheux. Essuyez dans une seule direction, sans faire de mouvements de va-et-vient. Cela préparera la surface pour la nouvelle couche d'adhésif.

Décollez le film de protection de la nouvelle vitre arrière. Alignez soigneusement un bord de l'écran contre le châssis du téléphone, et appuyez fermement sur la vitre pour l'encastrer dans le téléphone.

Suivez ce tutoriel pour réinstaller l'ancienne vitre arrière ou poser une vitre arrière qui ne comprend pas d'adhésif préinstallé.

[* icon_reminder] To install new rear glass:
- [* black] Use tweezers to peel away any remaining adhesive from the phone's chassis.
+ [* black] Use [product|IF145-020|tweezers] to peel away any remaining adhesive from the phone's chassis.
[* black] Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.
[* black] Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.
[* icon_reminder] If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow [guide|47490|this guide|new_window=true].

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.