주요 콘텐츠로 건너뛰기

Reemplazo del conjunto de bobina/motor de Andis Master Clippers

영어
스페인어
2 단계
Andis Master Clippers Motor/Coil Assembly Replacement: 0 단계, 이미지 3개 중 1개 Andis Master Clippers Motor/Coil Assembly Replacement: 0 단계, 이미지 3개 중 2개 Andis Master Clippers Motor/Coil Assembly Replacement: 0 단계, 이미지 3개 중 3개
  • Lift the switch assembly up to loosen the actuating arm.

  • Pull switch button away from actuating arm. Then unclip the actuating arm from the switch assembly.

  • Locate the switch insulation underneath the switch assembly.

  • Note: The switch insulation is fragile and thin. Be careful not to damage it.

Levanta el conjunto del interruptor para aflojar el brazo actuador.

Retira el botón del interruptor del brazo actuador. Luego suelta el brazo actuador del conjunto del interruptor.

Ubica el aislamiento del interruptor debajo del conjunto del interruptor.

Nota: El aislamiento del interruptor es frágil y delgado. Ten cuidado de no dañarlo.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.