/
내 작업대

기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
가입
로그인

How to reduce ChiliCube noise level by replacing fans

안내서로 돌아가기
영어
한국어
12 단계
How to reduce ChiliCube noise level by replacing fans, Attach fan so 3-way switch will reach: 0 단계, 이미지 2개 중 1개 How to reduce ChiliCube noise level by replacing fans, Attach fan so 3-way switch will reach: 0 단계, 이미지 2개 중 2개
Attach fan so 3-way switch will reach

  • If you do go with the 3-speed fan used here, look ahead in instructions to see where the switch gets positioned, then attach fan appropriately to the bracket/shroud plate.

  • Note direction fan is attached. The side with cable lead-in to motor, (and usually the only label or fancier of the two hub labels), that side faces inward towards the heat sink, and the bracket/shroud plate.

  • Don't freak out if you think you can't fish the cable through the shroud the right way. You can pass the whole fan through the shroud hole on the 45º.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.