주요 콘텐츠로 건너뛰기

iPod Touch 1st Generation Logic Board Replacement

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 4 안내서에 영향을 미칩니다.

1 단계 번역중

1 단계
iPod Touch 1st Generation Logic Board Replacement: 0 단계, 이미지 1개 중 1개
  • The battery is glued to the iPod's display, but no screws hold it in place.

  • Flip the iPod 180 degrees so it matches the orientation in the picture.

  • Carefully insert the spudger in between the battery and the display. There are routing cables underneath, so make sure you slowly pry the battery loose.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.