주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
스페인어
2 단계
While carefully lifting the keyboard ribbon cable with one hand, use the tip of a spudger or your fingernail to flip up the retaining flap on the keyboard ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself.
  • While carefully lifting the keyboard ribbon cable with one hand, use the tip of a spudger or your fingernail to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Pull the keyboard ribbon cable straight out of its socket toward the front edge of the Air.

Mientras levanta con cuidado el cable plano del teclado con una mano, use la punta de un spudger o la uña para levantar la solapa de retención del zifón ZIF del cable plano del teclado.

Asegúrese de estar prestando atención a la aleta de retención con bisagras, no al zócalo en sí.

Tire del cable de cinta del teclado directamente fuera de su zócalo hacia el borde frontal del Air.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.