주요 콘텐츠로 건너뛰기

올바른 스크루드라이버 비트 선택하기

3 단계 번역중

3 단계
Choosing the Right Screwdriver Bit, PH vs JIS: 0 단계, 이미지 2개 중 1개 Choosing the Right Screwdriver Bit, PH vs JIS: 0 단계, 이미지 2개 중 2개
PH vs JIS
  • Bits with the prefix "J" and "PH" are often thought to be the same bit. Don't be fooled by their similar appearance—they are quite different.

  • Phillips (PH) screws are designed to make a Phillips screwdriver cam out if too much torque is applied. This prevents damage to screws and screwdrivers or bits.

  • Japanese Industrial Standard (J) screws do not provide a cam-out option, and have 90 degree corners.

  • J (or JIS) and PH (Phillips) driver bits are not always interchangeable. As you can see, they do not share identical physical properties.

접두사 "J"가 붙은 비트와 "PH"가 붙은 비트는 대개 같은 비트라고 생각하기 쉽습니다. 비슷한 모양에 속지 마세요. 두 비트는 완전히 다릅니다.

십자/Phillips (PH) 나사는 너무 많은 힘을 가할 경우 십자 스크루드라이버가 캠아웃/빠지도록 설계되었습니다. 이렇게 하면 나사와 스크루드라이버 또는 비트의 손상을 방지할 수 있습니다.

일본 산업 표준/Japanese Industrial Standard (J) 나사는 캠아웃 옵션이 제공되지 않으며 모서리가 90도입니다.

J(또는 JIS) 및 PH(Phillips) 드라이버 비트는 항상 호환되지 않습니다. 보시다시피 두 나사는 동일한 물리적 특성을 공유하지 않습니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.