주요 콘텐츠로 건너뛰기

Retina MacBook 2016 下部ケースアセンブリの取り外し

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 17개에 영향을 미칩니다.

5 단계
Retina MacBook 2016 Lower Case Assembly Removal: 0 단계, 이미지 3개 중 1개 Retina MacBook 2016 Lower Case Assembly Removal: 0 단계, 이미지 3개 중 2개 Retina MacBook 2016 Lower Case Assembly Removal: 0 단계, 이미지 3개 중 3개
  • Hold the retaining flap open.

  • Disconnect the display cable by gently pulling it straight out of its connector.

  • Immediately close the retaining flap. Keep it closed throughout your repair.

  • During reassembly, keep the flap closed while you insert the display cable. Remember to orient the cable so its gold contacts face down, making sure not to crimp or fold it—it'll click into place when it's connected.

保持フラップを開いた状態で固定してください。

ディスプレイケーブルをコネクタからまっすぐゆっくりと引き出して取り外します。

保持フラップを直ぐに閉じます。この後修理が完了するまでフラップは閉じたままにして下さい。

組み立て直す際は、ディスプレイケーブルを挿入する際もフラップは閉じたままにして下さい。金色の接点を下に向けた状態で、ケーブルが丸まったり折れ曲がったりしないように注意して下さい。正しく接続される際は、「カチッ」という感触があるはずです。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.