주요 콘텐츠로 건너뛰기

Retina MacBook 2016 Opening Lower Case Assembly

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 25 안내서에 영향을 미칩니다.

11 단계
Retina MacBook 2016 Opening Lower Case Assembly: 0 단계, 이미지 3개 중 1개 Retina MacBook 2016 Opening Lower Case Assembly: 0 단계, 이미지 3개 중 2개 Retina MacBook 2016 Opening Lower Case Assembly: 0 단계, 이미지 3개 중 3개
  • Carefully close the MacBook and flip it over once again, so that the Apple logo faces up.

  • Lifting from the front edge, raise the upper case/display assembly to about a 90° angle, and prop it up against something sturdy so you don't have to hold it.

  • Add a piece of tape near the track pad to secure the upper case and prevent accidental movement.

  • It's possible to open the MacBook all the way and lay both sides down flat, but this may damage the flex cables and is not recommended.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.