주요 콘텐츠로 건너뛰기

13 단계 번역 중

13 단계
After peering into the heart of the Mate 9, we calm down a little and proceed with the more mundane removal of the motherboard flex cable and some connectors. A daughterboard falls into our hands, and with tears in our eyes, we see—the USB-C port is soldered to it. Nevertheless, this port is responsible for fully charging the Mate 9 in 90 minutes. Pretty nifty, as long as you don't wear it out.
  • After peering into the heart of the Mate 9, we calm down a little and proceed with the more mundane removal of the motherboard flex cable and some connectors.

  • A daughterboard falls into our hands, and with tears in our eyes, we see—the USB-C port is soldered to it.

  • Nevertheless, this port is responsible for fully charging the Mate 9 in 90 minutes. Pretty nifty, as long as you don't wear it out.

  • Two MEMS microphones and likely an antenna tuner is seen on this side of the daughterboard.

看完了 Mate 9 的心脏,我们继续拆解排线。

一块副板出现,上面连接着USB-C接口。

这个接口可以在90分钟内将电充满。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.