It's not charging it's switched off

Ac proper not working

Front left side

2021 model

Second top non turbo

Nissan magnite

Most all smartphone compass are notoriously inaccurate. Take a look at "http://www.tru-path.org" to find independent research about fixing residual (after calibration) azimuth errors; and watch for the near-term release of the TruPath Compass" app.

The TruPath Compass app will be the world's only compass app capable of being corrected for local magnetic/electromagnetic influences.

It sounds like you've already done some troubleshooting, which is great. Here are a few more steps you can try to resolve the issue:

1. Reset the Machine: Sometimes, a simple reset can solve many electronic issues. Try unplugging the machine from the power source for a few minutes, then plug it back in and see if the resistance resets to a lower level.
2. Check the Power Source: Ensure that the machine is receiving adequate power. Sometimes, fluctuations in power supply can affect the functionality of electronic components. Try plugging it into a different outlet or using a surge protector.
3. Inspect the Resistance Mechanism: Since you've already looked inside, focus on the resistance mechanism again. Check for any obstructions or debris that might be causing the resistance to stay high. Lubricate any moving parts as per the manufacturer's recommendations.
4. Contact Customer Support: If the issue persists after trying these steps, it might be a more complex problem with the tension motor or internal components. Reach out to Golds Gym customer support for assistance. They might be able to provide troubleshooting guidance or arrange for a repair if necessary, especially if your machine is still under warranty.
5. Professional Inspection: If all else fails, consider seeking assistance from a professional technician who specializes in fitness equipment repair. They can diagnose the issue more accurately and suggest the best course of action to get your machine back to working condition.

Remember to prioritize your safety while troubleshooting and handling any electrical components. If you're unsure about any steps, it's always best to seek professional help.

There could be several reasons your New Balance 1500 treadmill is turning on and then shutting off immediately. Here are a few things to check:

1. Ensure the safety key is inserted correctly and seated in the console. The safety key is a safety feature that shuts off the treadmill if it is removed.
2. Check the power cord and outlet to make sure they are functioning correctly. If the outlet is not getting power, the treadmill will not start.
3. If the treadmill has a power switch, turn it on.
4. If the treadmill has a reset button, try pressing it.
5. If none of these steps fix the problem, the issue may be with the treadmill's motor or control board. These components can be challenging to troubleshoot and repair, so you may need to contact the manufacturer or professional repair service for assistance.

(Find More creative solutions)

There could be several reasons your treadmill starts and stops after a few seconds. Here are a few things to check:

1. Ensure the safety key is inserted correctly and seated in the console. The safety key is a safety feature that shuts off the treadmill if it is removed.
2. Check the power cord and outlet to make sure they are functioning correctly. If the outlet is not getting power, the treadmill will not start.
3. If the treadmill has a power switch, turn it on.
4. If the treadmill has a reset button, try pressing it.
5. If none of these steps fix the problem, the issue may be with the treadmill's motor or control board. These components can be challenging to troubleshoot and repair, so you may need to contact the manufacturer or professional repair service for assistance. (FQA HealthCare)

j'avais presque le meme problem et j ai trouver la solution ici

Realme 8i front camera not working