주요 콘텐츠로 건너뛰기
도움말

iPad Pro 10.5" Battery Replacement에 대기 중인 편집

EN

참고: 수정을 수락하거나 거부하면 동일한 단계 또는 소개에 대해 이전에 보류 중인 모든 수정 내용이 암시적으로 적용됩니다.

#6 단계 수정됨: [단계 편집됨]

편집일 편집자 Calion (3.5k)

(해당 편집을 검토하기에 충분한 평판이 없습니다.)

-[* black] Use a pair of [product|IF145-020|tweezers] to peel off the tape that covers the ZIF connector for the SIM card tray flex cable.
+[* black] On cellular models, use a pair of [product|IF145-020|tweezers] to peel off the tape that covers the ZIF connector for the SIM card tray flex cable.


#3 단계 수정됨: [단계 편집됨]

편집일 편집자 Calion (3.5k)

(해당 편집을 검토하기에 충분한 평판이 없습니다.)

-[* black] Use the edge of a spudger to pry up and disconnect both the right interconnect cable and antenna cable, and gently fold them out of the way.
+[* black] Use the edge of a spudger to pry up and disconnect both the right interconnect cable and (for cellular models) antenna cable, and gently fold them out of the way.


#1 단계 수정됨: [단계 편집됨]

편집일 편집자 Calion (3.5k)

(해당 편집을 검토하기에 충분한 평판이 없습니다.)

-[* black] Use the edge of a spudger to pry up and disconnect both the left interconnect cable and antenna cable. Fold them gently out of the way.
+[* black] Use the edge of a spudger to pry up and disconnect both the left interconnect cable and (for cellular models) antenna cable. Fold them gently out of the way.
[* icon_caution] If either cable is glued to the board, use a little heat to soften the adhesive so you can separate the cable without damage.


소개 편집됨

편집일 편집자 Calion (3.5k)

(해당 편집을 검토하기에 충분한 평판이 없습니다.)

안내서 선행 작업