내 문제
I have an old iPhone 3 that I use on wifi to stream music in my garage. It was no longer booting because it wouldn't charge at all.
나의 수리
I got the battery and all the tools I needed from iFixit. I didn't realize until I started to take it apart that the case looked like it was bulging. When I opened the case (the suction cup worked great) I could see the main circuit board was bulging up and the screws literally popped out as they were loosened. I figured the main board was toast. I followed the iFixit directions and the new battery went in without any problem. iPhone works great again.
내 조언
Take your time and follow the instructions very carefully. There are subtle differences in the (extremely tiny) screws that are nicely pointed out in the online instructions. Made reassembly a breeze. Also be very careful with the ribbon connectors on older phones. Mine were somewhat brittle.
댓글 0개