소개

This guide will show you how to teardown the handle to access the power button and motherboard.

해당 분해도는 수리 안내서가 아닙니다. Hoover LiNX 수리는 저희 서비스 설명서를 사용하십시오.

Remove the single 15mm Phillips #1 screw from the handle.
  • Remove the single 15mm Phillips #1 screw from the handle.

댓글 쓰기

Remove the handle by pulling it up.
  • Remove the handle by pulling it up.

댓글 쓰기

Remove two 15mm Phillips #1 screws from the handle.
  • Remove two 15mm Phillips #1 screws from the handle.

댓글 쓰기

Use a plastic opening tool to carefully pry the black cover off of the handle. Use a plastic opening tool to carefully pry the black cover off of the handle.
  • Use a plastic opening tool to carefully pry the black cover off of the handle.

댓글 쓰기

Remove five 15mm Phillips #1 black screws from the handle. Remove five 15mm Phillips #1 black screws from the handle.
  • Remove five 15mm Phillips #1 black screws from the handle.

댓글 쓰기

Remove the silver plastic cover using the plastic opening tool. Remove the silver plastic cover using the plastic opening tool.
  • Remove the silver plastic cover using the plastic opening tool.

댓글 쓰기

Mark Nelson

회원 가입일: 2018년 01월 25일

392 평판

안내서 2개 작성하였습니다

USF Tampa, Team S7-G4, Passmore Spring 2018 USF Tampa, Team S7-G4, Passmore Spring 2018 회원

USFT-PASSMORE-S18S7G4

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 3

지난 7일: 25

지난 30일: 135

전체 시간: 333