I fixed my phone 3 times and one time I made a mistake and broke one of the pins from an iPhone xs max screen port can...

Of course! I'd be glad to assist you with the issue you're experiencing with your Nintendo Switch Joy-Con. Here are a few steps you can try to troubleshoot the problem: 1. Calibration: Begin by calibrating the Joy-Con controllers. On your Nintendo Switch, go to System Settings, then select Controllers and Sensors, and choose Calibrate Control Sticks. Follow the on-screen instructions to calibrate the Joy-Con analog sticks. This process can help rectify any misalignment or calibration issues that might be causing the problem. 2. Software Update: Ensure that your Nintendo Switch is running the latest system software. Updates often include bug fixes and improvements that can address controller-related issues. Connect your Switch to the internet, go to System Settings, select System, and choose System Update to check for any available updates and install them if necessary. 3. Joy-Con Reset: Try performing a reset of the affected Joy-Con. Hold down the Sync button on the Joy-Con for a few seconds until the...

Hi there @jannn999 , I'd be happy to help you with your questions regarding your screen replacement. Here are some suggestions: (1) Tape Replacement: It's generally recommended to replace the tape that was removed during the screen replacement process. The tape serves as a protective barrier and helps secure the LCD screws in place. You can use double-sided adhesive tape or specialized adhesive tape designed for screen replacements. This will ensure proper alignment and stability of the display. (2) Residue Removal: If using isopropyl alcohol (IPA) and a cotton swab is taking too long or pushing glue into the frame, you can try using a plastic card or a non-abrasive plastic tool to gently scrape off the residue. Be cautious not to apply excessive force to avoid damaging the frame or the underlying components. Another option is to use a mild adhesive remover or a specialized cleaning solution for electronics. Remember to apply the solution to a cloth or cotton swab rather than directly on the display to...

Hi @momcanfixi89446 Based on the information provided, it seems like you've made some progress with the Wii console but are still experiencing issues with the video signal. Here are a few possibilities to consider: (1) Video output settings: It's possible that the video output settings on the Wii console are not properly configured for your TV. Try accessing the Wii's system settings and adjusting the video output options to match your TV's resolution and display settings. You can do this by navigating to the Wii's main menu, selecting "Wii Options," then "Wii Settings," and finally "Screen." Experiment with different video output settings to see if any of them resolve the issue. (2) Faulty video cable: The problem could be related to the video cable connecting the Wii to the TV. Ensure that the cable is securely connected to both the Wii and the TV. If possible, try using a different video cable to see if the issue persists. Sometimes, a damaged or faulty cable can cause signal loss or display problems....

I'm sorry to hear about the issues you're experiencing with your Honda Accord. It seems like you've already rebuilt the transmission, but the car still won't move forward and has low RPM. Here are a few possibilities to consider: (1) Transmission fluid: Even though you mentioned that the fluid level is okay, it's essential to ensure that the fluid is clean and at the correct level. Dirty or insufficient transmission fluid can cause shifting problems and low RPM. Double-check the condition and level of the fluid to rule out any potential issues. (2) Torque converter: The torque converter is responsible for transferring power from the engine to the transmission. If it's faulty or not engaging properly, it can cause the symptoms you described. Make sure the torque converter is functioning correctly or consider having it inspected by a professional. (3) Shift linkage or solenoid: The shift linkage connects the gear shifter to the transmission. If there's a problem with the linkage, it can prevent the...

Hi @gazaboy @jayeff is Right the CPU is hard mounted but if I am right that pc model will support windows 11.

Check to make sure you connected it well or if the battery you have works