After doing some google searching on the PCB name "Dali V04 201" I have stumbled across some info which may be of use.

Pin-out BA and BB on a USB-C plug? : r/diyelectronics (reddit.com)

"The original connector has a 5.1 kOhm pull-down resistor on the CC1/CC2 lines."

This is the pinout detail I will attempt to use

PCB Label: Wire pair: Wire color connected /

VB - Red

VB - Red

G Pair 1 (Green foil) Grounding of pair 1

BA (B10) Pair 1 (Green foil) Grayish

BB (B11) Pair 1 (Green foil) White

A2 Pair 2 (Red/Pink foil) White

A3 Pair 2 (Red/Pink foil) Grayish

G Pair 2 (Red/Pink foil) Grounding of pair 2

A6 Pair 3 (Gray shielded) Green

A7 Pair 3 (Gray shielded) White

G Pair 3 (Gray shielded) Grounding of pair 3

HI Brian, Great guide. I have one of these cameras with a damaged usb plug, I was hoping to attempt a repair. I have peeled the usb plug on mine apart and uncovered the PCB and terminations, does this help unlock the Pinout detail required to make a full repair?

I can share some images, let me know if it would be of use to see them.

I was going to attempt to splice rather than open up the camera. Any reason this would be a bad idea?