주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

3403 질문 전체 보기

Dropped my phone in water, screen flickering, what do I do?

Alright, so the other day I dropped my iPhone 5 into the toilet, but I immediately took it out and turned it off. I then proceeded to put it into a bag of rice for the next few days. Everything works perfectly, I can use it, speakers work, everything. However, there a slight problem, the screen flickers a lot. I have it on full brightness and it constantly seems as if I'm just sliding the brightness from the lowest to the brightest. Is there anything I can do to fix it?

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
의견 추가하세요

Nintendo Switch 키트

게임으로 돌아가기 위한 빠른 해결책

Nintendo Switch 키트 쇼핑하기

Nintendo Switch 키트

게임으로 돌아가기 위한 빠른 해결책

Nintendo Switch 키트 쇼핑하기

답변 2개

Alex Trevino, here is my answer to a similar question. "Rice does not work. IOt will not prevent corrosion! The very first thing you want to do is to stop using your phone. Stop right now and do not continue to charge or sync it. The very next step I would do is to disassemble it by following this guide. Take a careful and close look at all components and connectors. Truly assess the damage. Look for major corrosion, evaluate the pins in the connectors etc,. Take a look at all connectors as well as cable ends. After that I would suggest that you clean it a couple of times in sterile water, not drinking water. Use a soft brush and clean it very, very thouroughly with the sterile water. Depending on the amount of corrosion, you may have to remove all the EMI shields. Once you got the gross contamination cleaned, use 90%+ isopropyl alcohol and clean your parts some more. For a proper cleaning, use this guide. It was written for a 3G but it is still pertinent to your phone as well. I can not stress the importance of a good cleaning enough, so do it over and over while replacing the alcohol after each cleaning. Do not use compressed air for the cleaning since that can drive liquid as well as corrosion particles into areas that will cause trouble later on. Do not use drinking water, if you need to use water, use sterile water. Also, you do not need to leave it to dry for a day. Isopropyl alcohol in the higher concentration will evaporate quickly and dissipate the water. The importance here is the cleaning. Do not forget to replace the battery. This is a must and not an option. It will fail if you do not take care of it now. Also, I suggest to replace the lightning connector. The guide for that is here Yes, do replace the battery for sure. Use this guide for that. Keep in mind that water damage is the hardest to troubleshoot and to repair. the issue with your screen could be the LCD itself or the backlight circuitry on your logic board. Hope this helps, good luck.

iPhone 이미지

안내서

Repairing iPhone Liquid Damage

난이도:

어려움

1 - 2 hours

iPhone 5 Battery 이미지

안내서

How to replace your iPhone 5 battery

난이도:

보통

15 minutes - 1 hour

iPhone 5 Logic Board 이미지

안내서

iPhone 5 Logic Board Replacement

난이도:

보통

1 - 2 hours

iPhone 5 Lightning Connector and Headphone Jack 이미지

안내서

iPhone 5 Lightning Connector and Headphone Jack Replacement

난이도:

보통

1 - 2 hours

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Dissassembling it will invalidate any warranties you have.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

the warranty cant do anything anyway when the iphone is water damaged. so in my humble opinion, just disassemble it, do wtv it takes so that you dont have to buy new iphone.

의견 추가하세요

귀하의 답변을 추가하십시오

Alex Trevino 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 16

7일 전: 166

30일 전: 786

전체 시간: 38,339