주요 콘텐츠로 건너뛰기

the Dell Dimension 3000 was a mid-range desktop from 2004. it shipped with 2 GBs of ram and your choice of a Pentium 4, 4 HT, or Celeron.

6 질문 전체 보기

replacing the CPU holder

The square frame that is used to help hold done the CPU. Two corners have broken off and the clips will not connect so the processor is not held in place. Where can I find the part?

Update (05/07/2017)

Block Image

Block Image

Here are the pictures - at least they show up in the preview!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 4개

Could you attach a picture? I think I know what you are talking about but I am not sure.

[image|1111596][image|1111597] Here are pictures of the broken CPU holder. I cannot click it into place because the clips are broken. Where can I get a new one?

Hi @Iwrayscott,

Your images are not showing.

You cannot add images to a 'comment' only to a question or an answer

You have to edit your question to add them, here's how 기존 질문에 이미지 추가하기

Thanks jayeff. I just answered my question with the pictures.

댓글 달기

답변 1개

선택된 해법

Hi @Iwrayscott,

Here is a link to the service manual for your desktop, (not that you need it but it may still be handy to have).

Scroll to the section that deals with removing the processor, (p.23 I think). It shows the heat sink retention base, which I think is the part that you want.

Here is a link to just one supplier of the part. It is not a recommendation to use them, it is shown to give an idea of the price. There may be others online that suit you better. Just search for Dell Dimension 3000 heat sink retention base for results.

Hopefully this is of some help.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

Thanks, jayeff! You have been extremely helpful!!

댓글 달기

귀하의 답변을 추가하세요

lwrayscott 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 22

전체 시간: 673