Removing screen on a glued tablet.

Question

NuVision TM800A510L

NuVision TM800A510L은 2015년에 출시된 안드로이드 태블릿입니다. 스피커, 인터넷 기능, 간편한 사용자 인터페이스를 갖추고 있어 주로 이메일이나 교육용으로 사용됩니다.

4 질문 전체 보기

Tom Dirrigl @dirgesan

평판: 37

2

게시됨: 2019년 5월 8일

옵션

Removing screen on a glued tablet.

Has anyone ever tried using a heating plate, such as the one on a 3d printer to heat the screen of a tablet to remove it? My 3d printer has a heating plate where I can set it to heat to a certain temperature up to around 110 Celsius. It’s accurate to a couple of degrees. I was just wondering if it might be possible to use this heater, along with some setup to only heat the edges of the screen, having more control over the temperature.

이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

예 아니요

점수 3

댓글 달기

답변 2개

oldturkey03 @oldturkey03 평판: 861.1k 1.5k 978 2.4k · Answer 1 · 2019-05-08T19:55:22-07:00

가장 유용한 답변

oldturkey03 @oldturkey03

평판: 861.1k

1.5k

978

2.4k

게시됨: 2019년 5월 8일

옵션

@dirgesan sound absolutely doable. (of course it will depend on the size of your hot plate). Just make sure that you do not go way above 80deg Celsius since otherwise you could destroy your LCD. Give it a try and take some pictures to create a guide for this https://www.ifixit.com/Guide/new

이 답변이 도움이 되었나요?

예 아니요

점수 3

댓글 1개:

Thanks for all the responses. I have an 4GB/128GB SP3 and a 2GB/32GB Nuvision TM800560L, both working fine and have Windows 10. The Nuvision is a bit of a dog and I was thinking of opening it up and seeing what I could do to it, maybe putting in bigger eMMC or battery, especially with the Win10 1903 upgrade. A 64GB eMMC sells for about $40 and is doable with my rework station. I've since found out the Nuvision's Z3735F Bay Trail processor accesses ram in single channel mode and has a 2GB limit. This kind puts a damper on things since it still works. If the tablet battery ever fails I'll use my printer to open it and also change out the eMMC but right now I don't see any point in spending time and money on what is, at best, a marginal upgrade. If I ever get a broken tablet to fix I'll be sure to post my efforts here. Thanks.

Tom Dirrigl 의 2019년 5월 11일

댓글 달기

Bruce Brannock @neurotone 평판: 13 2 · Answer 2 · 2019-05-08T20:30:21-07:00

Bruce Brannock @neurotone

평판: 13

2

게시됨: 2019년 5월 8일

옵션

I just replaced a battery in a Galaxy S7 Edge I have a heat gun that I've never used but the kit came with the iOpener. I figured why not it came with it and it worked great granted the phone had a bulging battery which was separating the backplate which probably made it easier. Your idea sounds pretty sound for certain things especially a controlled temperature.

이 답변이 도움이 되었나요?

예 아니요

점수 0

댓글 달기

NuVision TM800A510L

Removing screen on a glued tablet.

답변 2개

답변을 추가하세요