Solid red light on console

Question

Xbox 360 S

The slim edition of the classic Xbox 360 with a 250GB HDD and built-in Wi-Fi. Repair requires intricate prying and special tools.

307 질문 전체 보기

Nakita Brandford @nikki24

평판: 23

2

1

게시일: 2021년 8월 8일

옵션

Solid red light on console

Yesterday when we turn it on, it would turn off until a bit warm but today when we turned the Xbox on it is a solid red light. We removed the hard drive and inserted a memory card but that doesn't work, we took the Xbox apart and did a full clean and it still doing the same, removed the cables and put everything back but that is also not working. I have been living on google the whole day. Anyone got some advice that I have not tried yet?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 3개

선택된 답변

Ben Heinisch @armorben

평판: 1.2k

Armor Techs Inc

6

3

1

게시일: 2021년 8월 9일

옵션

We know you get a red light on the console itself, what color is the light on the power brick? If it is red it is likely defective. If the power brick checks out okay, see if you can get a secondary error code out of the console. You should be able to do this by holding the controller sync button and then hitting the eject button. You can do this 4 times to get 4 numbers. One light illuminated is a 1, two lights is 2, 3 lights is 3, and 4 lights is 0.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 9개:

Hi Ben, I never knew the model 1439 gave error codes but the brick is yellow and when I tried the sync button with eject button, the control had 4 green lights flash and still red on the console but I don't know if I did it right ?‍♀️?‍♀️

Nakita Brandford 의 2021년 8월 9일

@nikki24 Keep hitting that eject and sync combo until it goes back to just the red light. Should be 4 presses to get to the last light combination and the 5th should return to just the red dot. Each press will reveal a light combination. Let me know how many lights are illuminated after each press, should be between 1 and 4 each time.

Ben Heinisch 의 2021년 8월 10일

0003 is what I got. I have zero clue what it means!

Nakita Brandford 의 2021년 8월 11일

@armorben please tell me it is something small that can be easily repaired and won't cost more than buying a ps4 or a new Xbox!

Nakita Brandford 의 2021년 8월 11일

@nikki24 Unfortunately that error is not good. 0003 (also known as E03) indicates that the APU in the console is not receiving power. It could be a bad mosfet or a cold solder joint under the APU, this was more common on the original models but still happened on the earlier S model consoles. Either way replacing it would likely be cheaper than fixing it. Sorry to give you the bad news.

Ben Heinisch 의 2021년 8월 11일

댓글 4개 더보기

댓글 달기

Hi Ben, I never knew the model 1439 gave error codes but the brick is yellow and when I tried the sync button with eject button, the control had 4 green lights flash and still red on the console but I don't know if I did it right ?‍♀️?‍♀️ — Nakita Brandford
@nikki24 Keep hitting that eject and sync combo until it goes back to just the red light. Should be 4 presses to get to the last light combination and the 5th should return to just the red dot. Each press will reveal a light combination. Let me know how many lights are illuminated after each press, should be between 1 and 4 each time. — Ben Heinisch
@armorben please tell me it is something small that can be easily repaired and won't cost more than buying a ps4 or a new Xbox! — Nakita Brandford
@nikki24 Unfortunately that error is not good. 0003 (also known as E03) indicates that the APU in the console is not receiving power. It could be a bad mosfet or a cold solder joint under the APU, this was more common on the original models but still happened on the earlier S model consoles. Either way replacing it would likely be cheaper than fixing it. Sorry to give you the bad news. — Ben Heinisch