주요 콘텐츠로 건너뛰기

2009년 3월에 소개된 The Mac Pro (Early 2009)는 Intel Nehalem 아키텍처를 Apple의 전문가용 데스크탑 라인에 도입하였으며 미묘하게 재설계된 내부는 2010 및 2012 CPU 업데이트를 통해 소개되었습니다.

202 질문 전체 보기

Do you have a replacement for a north bridfge temperture sensor?

I'm getting error code: 4SNS/1/40000000:TNOD-117.114 on my 2010 Mac Pro this indicates an failure of the temperture sensor on the north bridge of the motherboard. Do you sell a replacement part for this?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 4개

@mayer - any ideas?

I may have it but would need a photo and/or a part number.

@thomasthumb - Can you give us a photo of the area and a tight one on the chip 기존 질문에 이미지 추가하기

I'm not even exactly sure where this is on the logic board but pretty sure it's on the processor tray of my 2010 Mac Pro 3.46 GHz 12-core. I'm not having problems with the computer I just bought it used on eBay and it passed all my live testing of ports, copying/compressing large files, and Geekbench processes but when I did a final test via the Apple Hardware Tool DVD disk I get these error codes that all point to the same issue each time I've tested it via the long extended AHT test protocol:

4SNS/1/40000000:TNOD-117.114

or this one:

4SNS/1/40000000:TNOD-117.364

or this one:

4SNS/1/40000000:TNOD-110.614

From what I understand from researching these error codes online they all point to a non functioning or partially functioning Temperture Sensor on the North Bridge of the Motherboard.

So I'm wondering if you guys sell this part for my Mac Pro and have any instructions on how to replace it?

Also, I'm wondering if this issue is really that big of a deal or a problem in real world terms?

THANK YOU!

댓글 달기

답변 1개

가장 유용한 답변

@thomasthumb the sensor is part of your northbridge heatsink. The 4,1 and 5,1 and interchangeable so a 2008-2009 should fit. Check this guide out first Mac Pro Single CPU Northbridge Heatsink Repair Does not look like iFixit is selling it.

Block Image

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

But I have a 12-core 3.46 dual CPU tray Mac Pro 2010 and this is for a single CPU tray. Would then the repair be mostly exactly as shown here but done twice for my model?

Also, in real world testing of this machine I get no errors nor have any problems of any kind so is this non functioning sensor really a problem then in real world terms?

@thomasthumb "I get no errors nor have any problems of any kind " if it aint broke dont fix it. If there are no issues, leave it alone. The Image is a 2010 and the guide is just that, a guide. Since you should still only have one Northbridge it should not change.

댓글 달기

귀하의 답변을 추가하세요

Thomas 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 7

전체 시간: 77