Schematics and pictures of circuit board. Very often the wire feeder stops working because of dead relay. You can replace the defective one with a more durable 8A relay.
Stef_AN @stefan27396
평판: 159
1
게시됨: 2024년 6월 3일
Schweissgeraet 1
좋은 질문입니까?
댓글 3개:
Hi @stefan27396,
Unfortunately you don't have enough rep points to add it to the guide so I'll do it
Thanks for providing the info.
Moderator
jayeff 의 2024년 6월 3일
Hi @jayeff ,
thanks for your help, I'm new here and trying to fight my way through this...
Have the same welding machine here and would like to post all the information I've discovered so far here to help other people.
Stef_AN 의 2024년 6월 3일
@stefan27396
If you haven't done so already, click on the device icon link to the right of your question at the top of the page.
When the repair guide page opens scroll down to find all the documents (including the one you provided -thanks once again) linked with the device.
Cheers
지난 24시간: 0
지난 7일: 1
지난 30일: 5
전체 시간: 76
1 
Hi @stefan27396,
Unfortunately you don't have enough rep points to add it to the guide so I'll do it
Thanks for providing the info.
Moderator
jayeff 의
Hi @jayeff ,
thanks for your help, I'm new here and trying to fight my way through this...
Have the same welding machine here and would like to post all the information I've discovered so far here to help other people.
Stef_AN 의
@stefan27396
If you haven't done so already, click on the device icon link to the right of your question at the top of the page.
When the repair guide page opens scroll down to find all the documents (including the one you provided -thanks once again) linked with the device.
Cheers
jayeff 의