Overheating : LED #4 RED is on after 2 minutes
Hi,
LED #4 RED is on after 2 minutes after start a machine.
Computer shutting off after LED 4 on red. Could not possible
to run ASD. CPU heat sink close to cpu very hot but upper
heat sink park cold.
Any ideas ?
Thanks
좋은 질문입니까?
댓글 7개
Hi, Mayer
my board did not have any buttons on the front, only power button on the
back side. I found SMU connector free-no wired connected. And CPU FAN connector connected to the HDD fan and HDD FAN connector to the CPU fan,
so weird. All caps looking great. I will try a new heat sink tonight .
P.S. my board is 820-1766-a
Vitali 의
Please give us the last three figures of your serial number located on the bottom of your stand. Thanks
mayer 의
Unfortunately I dont have a serial from this machine, someone pilled of
sticker from stand. Model #A1145 and this logic bord replaced a year ago.
Thanks
Vitali 의
http://www.pictureshoster.com/files/eert...
My Power Button
http://www.pictureshoster.com/files/63xj...
Free SMU connector
http://www.pictureshoster.com/files/twwo...
HDD Fan connected to the CPU FAN :)
http://www.pictureshoster.com/files/2jgz...
Vitali 의
[URL=http://www.pictureshoster.com/viewer.php...][IMG]http://www.pictureshoster.com/thumbnails...[/IMG][/URL]
[URL=http://www.pictureshoster.com/viewer.php...][IMG]http://www.pictureshoster.com/thumbnails...[/IMG][/URL]
[URL=http://www.pictureshoster.com/viewer.php...][IMG]http://www.pictureshoster.com/thumbnails...[/IMG][/URL]
[URL=http://www.pictureshoster.com/viewer.php...][IMG]http://www.pictureshoster.com/thumbnails...[/IMG][/URL]
Vitali 의
댓글 2개 더보기