평판: 13
1
I got a catch when the wood piece slipped when I was making a 45 degree cut. The blade no longer runs in the plate groove and there is some binding . I cannot see how this is adjusted back to square. HELP!
좋은 질문입니까?
평판: 549.3k
11
423
1.6k
Hi @donh23438
Here's the page from the service manual that shows how to adjust the angle of the blade that may help.
이 답변이 도움이 되었나요?
지난 24시간: 0
지난 7일: 4
지난 30일: 16
전체 시간: 168
