분해 안내서


지원 질문 질문하기

도구

해당 기기를 고치는데 사용하는 일반 도구들 입니다. 매 단계에 모든 도구를 사용하지는 않습니다.

Background ¶ 

The A3i amplifier was developed in 1996 by Cambridge Audio. The amplifier was designed and engineered in London, England. This device outputs 60 watts per channel, which is an intermediate strength amplifier. It was developed as a budget device, but it is not necessarily a low quality amplifier. Reviews are generally positive. The internals are well organized and most repairs can be done with a basic set of tools and a soldering iron.

Identification ¶ 

This amplifier is now discontinued. When it was in production it was part of the A-series, which has now been replaced by their popular Azur series. It can be identified on the rear panel near the power cord. The amplifier is powered by 220V. This can be seen by the large plug on the power cord.

Troubleshooting ¶ 

For solutions to some common problems, see the Cambridge Audio A3i troubleshooting guide

Additional Information ¶ 

This forum thread was started by the designer of the amplifier and contains valuable information

조회 통계:

지난 24시간: 2

지난 7일: 18

지난 30일: 74

전체 시간: 13,257