Gateway MA6 Laptop Cooling Assembly Replacement

Chris Naughton 및 5 다른 기여자

최종 수정일 June 22, 2019

15 분

조정

누락된 단계

소개

1단계로 이동하기

The cooling assembly is made up of a cooling fan and a large piece of copper to help dissipate heat out of the bottom of your laptop. Over time, the fan can wear out and it will need to be replaced.

필요한 것

도구

Phillips #0 Screwdriver

1 단계 Cooling Assembly

Gateway MA6 Laptop Cooling Assembly Replacement, Cooling Assembly: 1 단계, 이미지 2개 중 1개

Gateway MA6 Laptop Cooling Assembly Replacement, Cooling Assembly: 1 단계, 이미지 2개 중 2개

Loosen the seven 6 mm Phillips #0 screws on the back of the case.
Leave all the screws in the back plate and so you don't lose them.

편집

2 단계

Pull upwards on the top of the back cover to remove it.

편집

3 단계

Remove the four 9 mm Phillips #0 screws from the cooling assembly.

편집

4 단계

Gateway MA6 Laptop Cooling Assembly Replacement: 4 단계, 이미지 3개 중 3개

Gently and carefully remove the cooling assembly to avoid ripping the wire attaching it to the computer.
Gently flip the cooling fan assembly upside-down on the computer surface.
Carefully grab the wire attached to the computer and pull away from the port.
The cooling fan is now safe for removal.

편집

5 단계

When reinstalling heat sink and fans clean off the old thermal paste from both the heat sink and the CPU and then add new paste to CPU
If your unfamiliar with applying thermal paste How to Apply Thermal Paste