How To Repair An Overheating D-LINK DIR-655 Wireless Router

최종 수정일 May 27, 2021

30 - 45 분

조정

소개

Have you noticed your wireless router is overheating and shutting off? This can be caused by dust blocking the vents or gathering on the heatsinks. Use this guide to disassemble and clear out your router to get it back in working order.

필요한 것

도구

1 단계 How To Repair An Overheating D-LINK DIR-655 Wireless Router

How To Repair An Overheating D-LINK DIR-655 Wireless Router, How To Repair An Overheating D-LINK DIR-655 Wireless Router: 1 단계, 이미지 2개 중 1개

How To Repair An Overheating D-LINK DIR-655 Wireless Router, How To Repair An Overheating D-LINK DIR-655 Wireless Router: 1 단계, 이미지 2개 중 2개

Start by removing the three antennas by twisting each one in a counter-clockwise direction when facing the back panel.

번역하기

2 단계

Using your flathead screwdriver or plastic opening tool, gently pry the top two screw covers out of the router's case.

번역하기

3 단계

How To Repair An Overheating D-LINK DIR-655 Wireless Router: 3 단계, 이미지 3개 중 3개

Using your Phillips screwdriver, turn the screw counter-clockwise to remove it from the assembly.
Do the same for the second screw.

번역하기

4 단계

Gently pry the top of the case from the sides and bottom of the router.
After freeing the top, remove it and set it aside.

번역하기

5 단계

With your Phillips screwdriver, remove both screws by rotating in a counter-clockwise direction.

번역하기

6 단계

After removing the screws, lift the white LED cover up and off of the circuit board.

번역하기

7 단계

How To Repair An Overheating D-LINK DIR-655 Wireless Router: 7 단계, 이미지 3개 중 3개

Next, bend up the clip holding down the middle antenna wire.
Gently, unhook the wire and move it out of the way.

번역하기

8 단계

With the wire out of the way, separate the circuit board from the bottom assembly.
Be sure not to pinch or bend the antenna wire when you lift the circuit board.

번역하기