3 - 5 분
쉬움
커뮤니티-기여 안내서
Use this guide to remove or replace the back (bottom) cover on your Lenovo Ideapad 5 15ITL05
-
-
Use a T5 Torx driver to remove nine screws securing the back cover.
-
The three screws on the hinge side will be longer.
-
-
-
-
The back cover is held on by plastic tabs around the entire perimeter of the cover.
-
Use plastic pry tools at the seam. I like to start near the hinge.
-
-
-
Once all the tabs are loose, you will be able to remove the cover.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.
