주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Welcome! Does the battery in your controller not last as long as it used to or not at all? You must be looking to replace the battery in your Nintendo Switch Pro Controller, well you have come to the right place! Below you will find instructions for replacing the battery in your controller, read them carefully and follow the steps in order from one to six.

CAUTION: The handling of any swollen batteries should be done with the utmost care. For information on how to identify, what to do with, how to handle, and how to dispose of swollen batteries follow the link below.

What to do with a swollen battery

  1. Flip the controller over so the model stickers face the ceiling.
    • Flip the controller over so the model stickers face the ceiling.

  2. Use a Phillips #00 screwdriver to remove the two black flathead 7 mm screws that secure the handles, located at the ends of the handles. Use a Phillips #00 screwdriver to remove the two black flathead 7 mm screws that secure the handles, located at the ends of the handles.
    • Use a Phillips #00 screwdriver to remove the two black flathead 7 mm screws that secure the handles, located at the ends of the handles.

  3. Carefully remove the handle covers by pulling them away from the main body. Carefully remove the handle covers by pulling them away from the main body.
    • Carefully remove the handle covers by pulling them away from the main body.

  4. Use a Phillips #00 screwdriver to remove the four silver 5 mm screws that secure the clear back plastic cover. Use a Phillips #00 screwdriver to remove the four silver 5 mm screws that secure the clear back plastic cover.
    • Use a Phillips #00 screwdriver to remove the four silver 5 mm screws that secure the clear back plastic cover.

  5. Carefully pry away the clear plastic cover  using your fingernail. Carefully pry away the clear plastic cover  using your fingernail.
    • Carefully pry away the clear plastic cover using your fingernail.

  6. Remove the lithium-ion battery by using a fingernail or plastic opening tool to pry it up on the left side. Only a small amount of force is needed. Only a small amount of force is needed.
    • Remove the lithium-ion battery by using a fingernail or plastic opening tool to pry it up on the left side.

    • Only a small amount of force is needed.

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Daniel Tagalog

회원 가입일: 2019년 10월 10일

818 평판

안내서 3개 작성하였습니다

Cal Poly, Team S11-G2, Regan Fall 2019 Cal Poly, Team S11-G2, Regan Fall 2019 회원

CPSU-REGAN-F19S11G2

5 회원들

안내서 21개 작성하였습니다

now what after taking the battery out

Seani M - 답글

Install the replacement battery and follow the steps in reverse order…

frzno72 -

댓글 쓰기

조회 통계:

24 시간 전: 15

7일 전: 133

30일 전: 609

전체 시간: 7,249