소개
If your V-Moda Crossfade II Wireless has no audio or muffled audio you will need to replace your Speaker Driver.
However before disassembling your V-Moda Crossfade II Wireless take a look at this trouble shooting guide V-Moda Crossfade II Wireless Audio is Distorted or Intermittent to see if it fixes your issues.
Just follow these simple steps and you'll be able to do it yourself. For this guide you will need a Phillips #00 screwdriver head, some experience in soldering, and the soldering equipment that is listed on the right-hand side.
This guide requires soldering. If you're unfamiliar with soldering, review the How to Solder and Desolder Connections guide and take appropriate precautions before beginning.
필요한 것
-
-
-
Search for the left/right side of the V-moda Crossfade II Wireless.
-
Pinch the bottom of the ear pad and lift it up to remove it.
FixBot에 문의하기
-
-
-
-
-
-
Remove all six 10.1 mm screws that secures the driver assembly that you need to replace with a Phillips screwdriver.
-
Lift off the driver assembly with care not to strain the connected wire.
-
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
팀
University of North Texas, Team 1-4, Rea Spring 2026 University of North Texas, Team 1-4, Rea Spring 2026 회원
UNT-REA-S26S1G4
4 회원들
안내서 32개를 작성함
