#3단계의 변경 사항
편집 승인됨 완료자 Dominik Schnabelrauch
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [title] OLED Screen & Digitizer | |
| - | [* black] Insert wisdom here. |
| + | [* black] Once the screen is warm to the touch, apply a suction cup to the bottom edge of the phone. |
| + | [* black] Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the plastic bezel. Start to cut the adhesive by sliding the opening pick to the bottom right left corner. |