#3단계의 변경 사항
편집 승인됨 완료자 Dominik Schnabelrauch
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [title] OLED Screen & Digitizer | |
| [* black] Once the screen is warm to the touch, apply a suction cup to the bottom edge of the phone. | |
| - | [* black] Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the |
| + | [* black] Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right left corner. |