#2단계의 변경 사항
편집 승인됨 완료자 Dominik Schnabelrauch
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* icon_note] In case you have trouble to pry up the battery the adhesive may not be loose enough. You can apply some isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive. |
|---|---|
| + | [* icon_caution] Try your best not to deform the battery during the following removal process. Soft-shell lithium-ion batteries can leak dangerous chemicals, catch fire, or even explode if damaged. Do not use excessive force or pry at the battery with metal tools. |
| + | [* black] Insert the flat end of a spudger at the bottom left corner of the battery and start to pry it up. |
| + | [* icon_note] The adhesive is only located beneath the edges of the battery so there's no need to pry beneath its center. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가