#1단계의 변경 사항
편집 승인됨 완료자 Dominik Schnabelrauch
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Use a heat gun over the digitizer ribbon cable to soften the adhesive that secures it to the plastic housing. |
|---|---|
| + | [* black] [guide|25705|Use an iOpener|new_window=true] or a heat gun over the digitizer ribbon cable to soften the adhesive that secures it to the plastic housing. |
| [* icon_note] The Nexus 5X pictured here does not have a layer of shielding tape over the digitizer panel. If this tape is present on your device, simply peel it away from the plastic frame to free the digitizer panel. | |
| [* icon_reminder] You'll need to transfer or replace this strip of shielding tape when you install your new screen. | |
| [* black] Gently wedge the flat end of a spudger into the gap between the battery housing and the digitizer ribbon cable, or use your fingers to gently pull the digitizer ribbon cable free. |