주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

I recommend to use the iFixit Opening Picks for this step! Otherwise you could scratch/damage the keyboard or frame by metal on metal!

Place it between the keyboard and the frame. I started near the on/off button to make a opening.

Just go around the whole keyboard with the opening picks, slide it through every side of the keyboard, except for the under side (there are no clips there).

Just free all the clips, you should hear some pops. Do not pull the keyboard out, just free it from the clips which are holding the keyboard. The clips that are holding the keyboard are pretty strong, so you need a little force to free it.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.