주요 콘텐츠로 건너뛰기

Eclipse lock machine: transmission stuck by broken needle Replacement

3 단계
Eclipse lock machine: transmission stuck by broken needle Replacement: 0 단계, 이미지 3개 중 1개 Eclipse lock machine: transmission stuck by broken needle Replacement: 0 단계, 이미지 3개 중 2개 Eclipse lock machine: transmission stuck by broken needle Replacement: 0 단계, 이미지 3개 중 3개
  • The small side panel is easy to remove, via 1 screw.

  • The front bottom left panel s a bit tricky to remove; it is best to start with the small door on the left, on the second image, where two screws at the bottom keep it in place.

  • Once this has been removed, two more screws at the bottom can be removed to disassemble the right panel. it als has a small hook on the tight, that needs to be dislodged from a pneumatic tube.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.