내 작업대

기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다

Dell XPS 15 9575 I/O Board Replacement

1 단계 번역중

안내서로 돌아가기

영어

한국어

1 단계

Dell XPS 15 9575 I/O Board Replacement: 0 단계, 이미지 2개 중 1개

Dell XPS 15 9575 I/O Board Replacement: 0 단계, 이미지 2개 중 2개

Use a spudger or a clean fingernail to flip up the locking flap of the ZIF connector.
Use tweezers or your fingers to gently pull the orange cable out of its socket on the I/O board.
If the cable has a pull tab, use it to grip the cable. You may damage the cable by gripping it directly.
To reconnect, make sure the locking flap is flipped up and gently reinsert the cable. Then, flip the locking flap down to secure the cable. The cable should slide into the socket with little to no force. If you're having trouble, remove it, check that the flap is fully unlocked, and try again.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.