주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
6단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Flip the iPhone back over and insert a plastic card between the left side of the battery and the rear case.

Don't pry under the topmost section of the battery, near the volume up button and mute switch, or you may damage the audio controls cable, which is adhered to the rear case just beneath the battery.

Do not pry against the logic board, or you may permanently damage your iPhone.

Be careful to keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

Press the card in farther to break up the adhesive behind the battery.

Alternatively, a piece of dental floss may be used to separate the battery from the rear case. A stronger alternative to dental floss is an unwound guitar string, such as a 0.009 E string from a 12-string set.

Thread the floss or string underneath one end of the battery and pull side to side in a sawing motion to separate the adhesive.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.